All the advantages of rainwater, with the pressure and flow of mains.
This unique jet pump is self-priming with integrated electronic flow control. Connect it to a hose or tap and it will run when you open the tap and automatically shut off when you close it. An automatic anti-blocking system operates when the pump has been inactive for 3 days. It is ideal for pumping rainwater from tanks.
Ruggedly constructed with an AISI 304 stainless steel body and an AISI 416 stainless steel shaft they are suitable for both surface and submersed installation. They have IP68 class protection, as defined by International Standard EN 60529. The pump is suitable for submersion in water and
if they are surface mounted then it is not necessary to protect them from bad weather or flooding.
A dry run protection system stops the pump if it runs dry to protect it from damage.
The pump outlet connection fits 1” (25mm), ¾” (22mm) and ½” (13mm) garden hoses.
Specification
Type:
Maximum Outlet Head:
Maximum Suction Head:
Maximum Flow Rate:
Cuurent Consumption:
Weight:
Supply Voltage:
Water Resistance:
Power Cable:
Use: |
Clean water Only.
40 metres.
8 metres.
3000 litres / hour.
4.5A.
14.5 kg.
230/240Vac.
IP68 (submersible).
10 metres.
Submersible or surface dry mount. Self-priming. |
Suitable for:
- Irrigation systems.
- Domestic boosting.
- Extracting water from a water butt or underground tank.
- Moving water between storage tanks.
- Providing water via a hose to fill buckets and watering cans.
- Providing high pressure water for a hose jet, sprinkler or irrigation system.
| Dimensions / mm |
|
| A |
N |
H |
H1 |
N1 |
DNM |
DMA |
| 477 |
200 |
226 |
163 |
136 |
1¼" |
1" |
Link Kits
A link kit comprises a short length of hose with suitable connectors and an isolating valve to allow the pump to be connected to a water tank or butt.
Five link kits are available for the XAJE80P:
|
National Sales 0845 638 1822
prev item
