Installation Options
The two options that we recommend for installation are the Drainpipe Diverter option and the Pumping System option.
Drainpipe Diverter Option
This option is to install the storage tank in close proximity to a drainpipe and use a drainpipe diverter to feed water into the tank. The diverter is fitted to the drainpipe by
cutting a 30mm section of pipe out and slotting the diverter into the gap. Once the diverter is fitted it directs water to the tank until the tank is full; any further water is then directed down
the drainpipe.
The recommended materials required for this option are:
Titan Tank.
Drainpipe Diverter Kit.
Tank Tap & Fittings.
To order this option select the tank size you require from the table below and also select a drainpipe diverter kit and a tank tap with fittings.
Pumping system Option
This option is to install the storage tank away from your property, possibly behind a garage or in the bottom corner of the garden where it can be screened off if desired.
Pumping stations are then fitted at each drainpipe where water is to be collected. These stations contain a submersible pump with an automatic on/off float switch. When the water level in the pumping
station barrel rises above a set level the float switches the pump on. When the water level in the barrel is low enough the float switches the pump off. Each pumping station is connected to
the tank using standard garden hose (not supplied). The hose can be routed around the edges of your garden or dug into the ground.
The recommended materials required for this option are:
Titan Tank.
Hose pipe to tank connection kit.
Tank Tap & Fittings.
One or more Pumping Stations.
13mm Garden Hose (not supplied).
To order this option select the tank size you require from the table below and also select a garden hose fitting kit and a tank tap with fittings.
After adding the tank to your shopping basket you can then chose your pumping stations.
Titan Tank Selection
Our range of Titan tanks have capacities from 1300 litres (300 gallons) to 10,000 litres (2200 gallons). One of these
vessels can enable you to store massive quantities of water for your garden.
Titan tanks are:
Guaranteed for 10 years.
Manufactured from quality medium density polythene.
Tough and durable.
Weatherproof.
Maintenance Free.
Ultraviolet stabilised for protection from sunlight.
Rotationally moulded in one piece to provide a stress free container of uniform wall thickness.
Fitted with sealed manhole for easy access.
V1300BLWAT
1300
300
1" BSP
1190mm
1420mm
V2600BLWAT
2600
570
1" BSP
1610mm
1430mm
V3600BLWAT
3600
800
1½" BSP
1840mm
1750mm
V5000BLWAT
5000
1100
1½" BSP
2010mm
2240mm
V10000BLWAT
10000
2200
2" BSP
2640mm
2480mm
Please note that all dimensions are approximate. These tanks are not suitable for storing potable water for human consumption.
Each tank has a manhole entry and a threaded pipe entry at the top, which may be used filling. A tap may be fitted to the threaded outlet
at the bottom of the vessel.
V1300BLWAT
1300
£359.00
V2600BLWAT
2600
£579.00
V3600BLWAT
3600
£799.00
V5000BLWAT
5000
£1,399.00
V10000BLWAT
10000
£2,599.00
Add a tank tap with fittings to the order at an additional £21.99 .
Add a drainpipe diverter kit to the order at an additional £12.00 .
Add a hose pipe connection kit to the order at an additional £21.99 .
Titan tank prices include VAT and mainland UK delivery.
Buy Titan Tank Selection
Pumping Stations
Details are available on the .