|
These oak barrel water butts are made from genuine ex-distillery oak barrels. They are available with a number options for collecting rainwater from drainpipes and each is supplied complete with a
submersible pump. The pump includes a float switch, which activates the pump when the water in the barrel reaches a pre-determined level and stops the pump when the water level is low. They are intended for use
with a large plastic storage tank; details of which are available on the previous page. Water is collected either through an entry hole in the lid of the barrel or via a drainpipe diverter.
Please note that all barrel dimensions and capacities are approximate.
Pumping Station Barrel Sizes
40-gallon
Approx. capacity 40-gallons (180 litres). Approx. 35" (88 cm) high, approx.
diameter at middle 24" (60cm) to 25" (62cm).
56-gallon
Approx. capacity 56-gallons (250 litres). Approx. 37" (92 cm) high, approx.
diameter at middle 27" (68cm) to 29" (73cm).
100-gallon
Approx. capacity 100-gallons (450 litres). Approx. 50" high (125 cm), approx. diameter at middle 36" (90cm).
|